SHARK-SKIN SURFACES FOR FLUID-DRAG REDUCTION IN TURBULENT FLOW: A REVIEW
-
摘要:快速游动的鲨鱼, 其皮肤表面沿流动方向有序地排列着沟槽状结构, 人们认为这种结构能在湍流流动 中减小表面摩擦阻力. 人们仿真这种生物结构来进行实验研究和应用, 通过复制和改善鲨鱼皮肤表面沟槽状 结构, 使得摩擦阻力最大减小了近10%. 在实验和模拟仿真中, 人们不断讨论和研究湍流流动阻力的形成机制 和沟槽减阻的理论特性. 本文综述了沟槽减阻理论特性的一些研究方法, 并且归纳定义了沟槽减阻最优几何 形状及其尺寸; 详细考虑流体流动的特点, 给出了一种用来选择最优沟槽形状及其尺寸的方法; 综述了目前的 沟槽加工制造技术. 由于鲨鱼皮肤表面存在少量黏液, 从仿生学的角度, 文章最后综述并展望了通过局部应用 疏水性材料来改变沟槽附近流场属性, 从而达到更大程度上减小阻力的目标.Abstract:The skin of fast-swimming sharks exhibits riblet structures aligned in the direction of flow that are known to reduce skin friction drag in the turbulent-flow regime. Structures have been fabricated for study and application that replicate and improve upon the natural shape of the shark-skin riblets, providing a maximum drag reduction of nearly 10 percent. Mechanisms of fluid drag in turbulent flow and riblet-drag reduction theories from experiment and simulation are discussed. A review of riblet-performance studies is given, and optimal riblet geometries are defined. A survey of studies experimenting with riblet-topped shark-scale replicas is also given. A method for selecting optimal riblet dimensions based on fluid-flow characteristics is detailed, and current manufacturing techniques are outlined. Due to the presence of small amounts of mucus on the skin of a shark, it is expected that the localized application of hydrophobic materials will alter the flow field around the riblets in some way beneficial to the goals of enhanced drag reduction.
-
1 Bhushan B. Biomimetics: lessons from nature{an overview. Philosophical Transactions of the Royal Soci- ety A: Mathematical, Physical and Engineering. Sciences,2009, 367: 1445-1486 2 Bhushan B. Handbook of Nanotechnology. Germany: Springer Verlag, 2010 3 Bhushan B. Nanotribology and Nanomechanics an Intro- duction. Germany: Springer Verlag, 2005 4 Nosonovskii M, Bhushan B. Multiscale Dissipative Mech- anisms and Hierarchical Surfaces: Friction, Superhy- drophobicity, and Biomimetics. Germany: Springer Ver- lag, 2008 5 Bhushan B, Her E K. Fabrication of superhydrophobic surfaces with high and low adhesion inspired from rose petal. Langmuir, 2010, 26: 8207-8217 6 Gorb S. Attachment Devices of Insect Cuticle. Germany: Springer, 2001 7 Bhushan B. Adhesion of multi-level hierarchical attach- ment systems in gecko feet. Journal of Adhesion Science and Technology, 2007, 12: 1213-1258 8 Cutkosky M R, Kim S. Design and fabrication of multi- material structures for bioinspired robots. Philosophical Transactions of the Royal Society A: Mathematical, Phys- ical and Engineering Sciences, 2009, 367: 1799-1813 9 Shephard K L. Functions for sh mucus. Reviews in Fish Biology and Fisheries, 1994, 4: 401-429 10 Hoyt J W. Hydrodynamic drag reduction due to sh slimes. Swimming and Flying in Nature, 1975, 2: 653-672 11 Choi K S, Yang X, Clayton B R, et al. Turbulent drag reduction using compliant surfaces. Proceedings of the Royal Society of London. Series A: Mathematical, Phys- ical and Engineering Sciences, 1997, 453: 2229-2240 12 Bechert D W, Bruse M, Hage W, et al. Experiments on drag-reducing surfaces and their optimization with an ad- justable geometry. Journal of Fluid Mechanics, 1997, 338:59-87 13 ReifWE. Squamation and Ecology of Sharks. 78 ed. Ger- many: E. Schweizerbartsche Verlagsbuchhandmng, 1985 14 Bechert D W, Bruse M, Hage W. Experiments with three- dimensional riblets as an idealized model of shark skin. Experiments in Fluids, 2000, 28: 403-412 15 Munson B R, Young D F, Okiishi T H. Fundamentals of Fluid Mechanics. Manhattan: John Wiley & Sons, Inc.,1999 16 Kline S J, Reynolds W C, Schraub F A, et al. The struc- ture of turbulent boundary layers. J. Fluid Mech., 1967,30: 741-773 17 Coles D. A model for ow in the viscous sublayer. 1978 18 Robinson S K. The kinematics of turbulent boundary layer structure. NASA STI/Recon Technical Report N. 1991,91: 26465. 19 Lee S J, Lee S H. Flow eld analysis of a turbulent bound- ary layer over a riblet surface. Experiments in Fluids,2001, 30: 153-166 20 Wilkinson S P. In uence of wall permeability on turbulent boundary-layer properties. 1983. 21 Goldstein D, Handler R, Sirovich L. Direct numerical sim- ulation of turbulent ow over a modeled riblet covered surface. Journal of Fluid Mechanics, 1995, 302: 333-376 22 Walsh M J. Drag characteristics of V-groove and trans- verse curvature riblets. Viscous Flow Drag Reduction,1980. 168-184 23 Walsh M J. Turbulent boundary layer drag reduction us- ing riblets. 1982 24 Walsh M J, Lindemann A M. Optimization and applica- tion of riblets for turbulent drag reduction. 1984 25 Bechert D W, Hoppe G, Reif W E. On the drag reduction of the shark skin. 1985 26 Bechert D W, Bartenwerfer M, Hoppe G, et al. Drag re- duction mechanisms derived from shark skin. 1986 27 Bechert D W, Bruse M, Hage W, et al. Biological sur- faces and their technological application-laboratory and ight experiments on drag reduction and separation con- trol. 1997. 28 Bechert D W, Bruse M, Hage W, et al. Fluid mechanics of biological surfaces and their technological application. Naturwissenschaften, 2000, 87: 157-171 29 Wilkinson S P, Lazos B S. Direct drag and hot-wire mea- surements on thin-element riblet arrays. 1987. 30 Wilkinson S P, Anders J B, Lazos B S, et al. Turbu- lent drag reduction research at NASA Langley: progress and plans. International Journal of Heat and Fluid Flow,1988, 9: 266-277 31 Walsh M J, Anders J B. Riblet/LEBU research at NASA Langley. Applied Scientic Research, 1989, 46: 255-262 32 Lang A W, Motta P, Hidalgo P, et al. Bristled shark skin: A microgeometry for boundary layer control?. Bioinspi- ration & Biomimetics, 2008, 3: 46005 33 Jung Y C, Bhushan B. Biomimetic structures for uid drag reduction in laminar and turbulent ows. Journal of Physics: Condensed Matter, 2010, 22: 35104 34 Rohr J J, Andersen G W, Reidy L W, et al. A compari- son of the drag-reducing benets of riblets in internal and external ows. Experiments in Fluids, 1992, 13: 361-368 35 Liu K N, Joseph D D, Riccius O, et al. Drag reduction in pipes lined with riblets. AIAA Journal, 1990, 28: 1697 36 Bechert D W, Hoppe G, Hoeven J G T, et al. The Berlin oil channel for drag reduction research. Experiments in Fluids, 1992, 12: 251-260 37 Krieger K. Do pool sharks swim faster. 2004 38 Weiss M H. Implementation of drag reduction techniques in natural gas pipelines. In: 10th European Drag Reduc- tion Working Meeting. Berlin, Germany: 1997. 368. 39 Matthews J N A. Low ‐ drag suit propels swimmers. Physics Today, 2008, 61: 32 40 Han X, Zhang D Y. Study on the micro-replication of shark skin. Science in China Series E: Technological Sci- ences, 2008, 51: 890-896 41 Marentic F J, Morris T L. Drag reduction article. 1992 42 Koury E, Virk P S. Drag reduction by polymer solutions in a riblet-lined pipe. Applied Scientic Research, 1995,54: 323-347 43 Choi K S, Gadd G E, Pearcey H H, et al. Tests of drag- reducing polymer coated on a riblet surface. Applied Scientic Research, 1989, 46: 209-216 44 Han M, Huh J K, Lee S S, et al. Micro-riblet lm for drag reduction. 2002 45 Lee S J, Choi Y S. Decrement of spanwise vortices by a drag-reducing riblet surface. Journal of Turbulence,2008(9). 46 Denkena B, de Leon L, Wang B. Grinding of microstruc- tured functional surfaces: a novel strategy for dressing of microproles. Production Engineering, 2009, 3: 41-48 47 Klocke F, Feldhaus B, Mader S. Development of an incre- mental rolling process for the production of dened riblet surface structures. Production Engineering, 2007, 1: 233-237 48 Ou J, Perot B, Rothstein J P. Laminar drag reduction in microchannels using ultrahydrophobic surfaces. Physics of Fluids, 2004, 16: 4635 49 Daniel T L. Fish mucus: In situ measurements of poly- mer drag reduction. The Biological Bulletin, 1981, 160:376-382 50 Frings B. Heterogeneous drag reduction in turbulent pipe flows using various injection techniques. Rheologica Acta,1988, 27: 92-110
点击查看大图
计量
- 文章访问数:3444
- HTML全文浏览量:282
- PDF下载量:2625
- 被引次数:0