| Citation: | Wu X R, Xu W. Weight function theory and applications for crack analysis: A review and outlook. Advances in Mechanics, 2022, 52(3): 415-507 doi: 10.6052/1000-0992-21-060
|
|
黄克智, 余寿文. 1985. 弹塑性断裂力学. 北京: 清华大学出版社
Huang K Z, Yu S W. 1985. Elastoplastic Fracture Mechanics. Beijing: Tsinghua University Press
|
|
| [2] |
匡震邦, 马法尚. 2002. 裂纹端部场. 西安: 西安交通大学出版社
Kuang Z B, Ma F S. 2002. Crack Tip Fields. Xi'an: Xi'an Jiaotong University Press
|
|
郦正能(主编). 2012. 应用断裂力学. 北京: 北京航空航天大学出版社
|
|
|
李宗利, 任青文, 王亚红. 2005. 岩石与混凝土水力劈裂缝内水压力分布的计算. 水利学报, 36: 656-661 (Li Z L, Ren Q W, Wang Y H. 2005. Formula for water pressure distribution in rock or concrete fractures formed by hydraulic fracturing. Shuili Xuebao, 36: 656-661). doi: 10.3321/j.issn:0559-9350.2005.06.004
|
|
|
刘曰武, 高大鹏, 李奇等. 2019. 页岩气开采中的若干力学前沿问题. 力学进展, 49: 201901 (Liu Y W, Gao D P, Li Q, et al. 2019. Mechanical frontiers in shale-gas development. Advancesin Mechanics, 49: 201901). doi: 10.6052/1000-0992-17-020
|
|
|
刘正和, 杨录胜, 廉浩杰等. 2019. 砂岩钻孔轴向预制裂缝定向压裂试验研究. 煤炭学报, 44: 2057-2065 (Liu Z H, Yang L S, Lian H J, et al. 2019. Experimental study of directional fracturing in sandstones with prefabricated cracks in the axial direction of borehole. Journal of China Coal Society, 44: 2057-2065).
|
|
|
彭中伏, 陈学军. 2018. 热对流作用下筒壁涂层的边裂行为. 力学学报, 50: 307-314 (Peng Z F, Chen X J. 2018. Edge cracking behavior of a coated hollow cylinder due to thermal convection. Chinese Journal of Theoretical and Applied Mechanics, 50: 307-314). doi: 10.6052/0459-1879-17-412
|
|
|
唐世斌, 刘向君, 罗江, 董卓. 2017. 水压诱发裂缝拉伸与剪切破坏的理论模型研究. 岩石力学与工程学报, 36: 2124-2135 (Tang S B, Liu X J, Luo J, Dong Z. 2017. Theoretical model for tensile and shear crack initiation at the crack tip in rock subjected to hydraulic pressure. Chinese Journal of Rock Mechanics and Engineering, 36: 2124-2135).
|
|
|
汤英, 张晓晶, 吴学仁. 2012. 单边缺口拉伸试样喷丸强化残余应力及其三维应力强度因子分析. 航空学报, 33: 1265-1274 (Tang Y, Zhang X J, Wu X R. 2012. Analysis of residual stresses and three-dimensional stress intensity factors for shot peened single edge notch tension specimens. Acta Aeronutica et Astronautica Sinica, 33: 1265-1274).
|
|
|
童第华, 吴学仁. 2013. 无限大板圆孔边双裂纹的裂纹面位移权函数解. 航空学报, 34: 2341-2348 (Tong D H, Wu X R. 2013. Weight function solutions of crack surface displacements for double cracks emanating from a circular hole in an infinite plate. Acta Aeronautica et Astronautica Sinica, 34: 2341-2348).
|
|
|
童第华, 吴学仁, 胡本润, 陈勃. 2017. 半无限板边缘裂纹的权函数解法与评价. 力学学报, 49: 848-857 (Tong D H, Wu X R, Hu B R, Chen B. 2017. Weight function methods and assessment for an edge crack in a semi-infinite plate. Chinese Journal of Theoretical and Applied Mechanics, 49: 848-857).
|
|
|
童第华, 吴学仁, 赵晓辰, 徐武, 胡本润. 2000. 任意跨宽比三点弯曲梁断裂力学参数的权函数法求解. 航空材料学报, 40: 127-136 (Tong D H, Wu X R, Zhao X C, Xu W, Hu B R. 2000. SIF and CMOD for three-point bending beams with arbitrary span-to-width ratios by using analytical weight function method. Journal of Aeronautical Materials, 40: 127-136).
|
|
|
王自强, 陈少华. 2009. 高等断裂力学. 北京: 科学出版社
Wang Z Q, Chen S H. 2009. Advanced Fracture Mechanics. Beijing: Science Press
|
|
|
吴学仁, 黄新跃. 1988. 受任意钉载圆孔边径向裂纹分析. 航空学报, 10: A442-447 (Wu X R, Huang X Y. 1988. On the problem of radial cracks emanaing from an arbitrarily loaded circular hole. Acta Aeronautica et Astronautica Sinica, 10: A442-447).
|
|
|
吴学仁. 1989. 冷挤压孔边残余应力场中裂纹的应力强度因子. 航空学报, 9: A434-439 (Wu X R. 1989. Residual stress intensity factors for radial cracks at the edge of a cold worked hole. Acta Aeronautica et Astronautica Sinica, 9: A434-439).
|
|
|
吴学仁, 郭亚军. 1999a. 纤维金属层板疲劳寿命预测的研究进展. 力学进展, 29: 304-316 (Wu X R, Guo Y J. 1999a. Development of methodology for predicting fatigue life of fiber reinforced metal laminates. Advances in Mechanics, 29: 304-316). doi: 10.3321/j.issn:1000-0992.1999.03.002
|
|
|
吴学仁, 郭亚军. 1999b. 变幅载荷下纤维金属层板的疲劳与寿命预测. 中国工程科学, 1: 35-40 (Wu X R, Guo Y J. 1999b. Fatigue life prediction of fiber reinforced metal laminates under variable amplitude loading. Engineering Science, 1: 35-40). doi: 10.3969/j.issn.1009-1742.1999.03.007
|
|
|
吴学仁, 赵伟, Newman Jr J C. 2000. 裂纹体分析的三维权函数法一模型、评价与应用. 固体力学学报, 21(增刊): 14-22
Wu X R, Zhao W, Newman J C, Jr. 2000. A three-dimensional weight function method for crack analysis: modeling, evaluation and application, Acta Mechanica Solida Sinica. 21 (Special Issue): 14-22
|
|
|
吴学仁, 童第华, 徐武, 赵晓辰. 2019. 断裂力学的权函数理论与应用. 北京: 航空工业出版社
|
|
|
徐世烺. 2011. 混凝土断裂力学. 北京: 科学出版社
Xu S L. 2011. Fracture Mechanics of Concrete. Beijing: Science Press
|
|
|
徐世烺, 王建敏. 2009. 水压作用下大坝混凝土裂缝控制与双K断裂参数. 土木工程学报, 42: 119-125 (Xu S, Wang J. 2009. Crack propogation in a concrete dam under water pressure and determination of the double-K fracture parameters. China Civil Engineering Journal, 42: 119-125). doi: 10.3321/j.issn:1000-131X.2009.07.018
|
|
|
徐武. 2012. 飞机结构多位置损伤分析的权函数法与剩余强度预测. [博士论文]. 上海: 上海交通大学
Xu W. 2012. Weight function method and residual strength prediction for multi-position damage analysis of aircraft structure. [PhD Thesis]. Shanghai: Shanghai Jiao Tong University
|
|
|
杨卫. 1995. 宏微观断裂力学. 北京: 国防工业出版社
Yang W. 1995. Macro and Micro Fracture Mechanics. Beijing: National Defense Industry Press
|
|
|
袁奎霖, 周忠华, 赵峰, 洪明. 2019. 双向应力场中表面裂纹应力强度因子的权函数法. 船舶力学, 23: 976-987 (Yuan K L, Zhou Z H, Zhao F, Hong M. 2019. Improved point load weight function for stress intensity factor of surface cracks under two-dimensional stress field. Journal of Ship Mechanics, 23: 976-987). doi: 10.3969/j.issn.1007-7294.2019.08.010
|
|
|
张秀芳, 徐世烺. 2011. 权函数法计算的混凝土断裂韧度. 工程力学, 28: 58-62 (Zhang X F, Xu S L. 2011. Fracture toughness determined using weight function approach. Engineering Mechanics, 28: 58-62).
|
|
|
张正国, 孟庆臣, 杨国义, 邹广平. 1998. Dugdale模型解法研究. 哈尔滨工程大学学报, 19: 85-93 (Zhang Z G, Meng Q C, Yang G Y, Zou G P. 1998. Study of solutions of Dugdale model. Journal of Harbin Engineering University, 19: 85-93). doi: 10.3969/j.issn.1006-7043.1998.01.014
|
|
|
赵伟. 1988. 三维裂纹分析的权函数理论及应用[博士论文]. 北京: 北京航空材料研究院
Zhao W. 1988. Theory and applications of three-dimensional crack analysis[PhD thesis]. Beijing: Beijing Institute of Aeronautical Materials
|
|
|
赵伟, 吴学仁, 颜鸣皋. 1990. 一种高效准确的三维权函数法及其应用. 航空材料学报, 10增刊: 9-22
Zhao W, Wu Xueren, Yan Minggao. 1990. An efficient and accurate three-dimensional weight function method and its application. Journal of Aeronautical Materials, 10 S: 9-22
|
|
|
赵伟, 吴学仁, 颜鸣皋. 1991a. 受远方拉伸的孔边角裂纹的应力强度因子. 力学学报, 23: 315-322 (Zhao W, Wu Xueren, Yan Minggao. 1991a. Stress intensity factors for corner cracks at a hole under uniform tension. Acta Mechanica Sinica, 23: 315-322).
|
|
|
赵伟, 吴学仁, 颜鸣皋. 1991b. 小表面裂纹应力强度因子的权函数解. 航空学报, 12: B44-49 (Zhao W, Wu X R, Yan M G. 1991b. Solution of stress intensity factors by weight function for small corner cracks in plates. Acta Aeronautica et Astronautica Sinica, 12: B44-49).
|
|
|
赵伟, 吴学仁, 颜鸣皋. 1991c. 小角裂纹应力强度因子的权函数解. 力学学报, 24: 376-380 (Zhao W, Wu X R, Yan M G. 1991c. Solution of stress intensity factors by weight function for small corner cracks in plates. Acta Mechanica Sinica, 24: 376-380).
|
|
|
赵晓辰. 2016. 复杂应力场三维裂纹宽范围点载荷权函数法[博士论文]. 北京: 北京航空材料研究院
Zhao X C. 2016. A wide-range point weight function method for analysis of three-dimensional crack problems[PhD thesis]. Beijing: Beijing Institute of Aeronautical Materials
|
|
|
赵晓辰, 吴学仁, 童第华, 徐武. 2018. 无限板孔边裂纹问题的高精度解析权函数解. 航空学报, 39: 221976 (Zhao X C, Wu X R, Tong D H, Xu W. 2018. Accurate analytical weight function solitions for crack at edge of circular hole in infinite plate. Acta Aeronautica et Astronautica Sinica, 39: 221976).
|
|
|
中国航空研究院. 1993. 应力强度因子手册. 北京: 科学出版社
Chinese Aeronautical Establishment. 1993. Stress Intensity Factor Handbook. Beijing: Science Press
|
|
|
王世伟, 李先达, 吴学仁, 贾国荣 主编. 1994. 军用飞机疲劳-损伤容限-耐久性设计手册. 北京: 中国航空研究院.
Wang S W, Li X D, Wu X R, Jia G R. 1994. Military Aircracft Fatigue - Damage Tolerance - Durability Design Handbook. Beijing: Chinese Aeronautical Establishment.
|
|
|
庄茁, 蒋持平. 2004. 工程断裂与损伤. 北京: 机械工业出版社
Zhuang Z, Jiang C P. 2004. Engineering Fracture and Damage. Beijing: China Machine Press
|
|
|
Adamson R M, Dempsey J P, Mulmule S V. 1996. Fracture analysis of semi-circular and semi-circular-bend geometries. International Journal of Fracture, 77: 213-222. doi: 10.1007/BF00018778
|
|
|
Alderliesten R C. 2007. On the available relevant approach for fatigue crack propagation prediction in Glare. International Journal of Fatigue, 29: 289-304. doi: 10.1016/j.ijfatigue.2006.03.003
|
|
|
Aliabadi M, Rooke D, Cartwright D. 1987. An improved boundary element formulation for calculating stress intensity factors: application to aerospace structures. The Journal of Strain Analysis for Engineering Design, 22: 203-207. doi: 10.1243/03093247V224203
|
|
|
Andersson P, Bergman M, Brickstad B, Dahlberg L, Nilsson F, Sattari-Far I. 1999. A procedure for safety assessment of components with cracks – handbook, 3rd revised edition. Stockholm, Sweden: SKI Report 99: 49.
|
|
|
Anderson T L. 2005. Fracture Mechanics, Fundamentals and Applications, 3rd Edition. Boca Raton: CRC Press, Taylor & Francis Group, LLC
|
|
|
Andrasic C, Parker A. 1980. Weight functions for cracked, curved beams// Numerical Methods in Fracture Mechanics. Proceedings of the 2nd Int. Conf. , Swansea, UK: 67-82.
|
|
|
Andrasic C, Parker A. 1984. Dimensionless stress intensity factors for cracked thick cylinders under polynomial crack face loadings. Engineering Fracture Mechanics, 19: 187-193. doi: 10.1016/0013-7944(84)90078-X
|
|
|
Anisworth A, Schwalbe H, Zerbst U. 2003. Comprehensive Structural Integrity: Crack Driving Forces Estimation Methods. Pergamon Elsevier: 133-176.
|
|
|
API 579. 2000. Recommended practice for fitness-for-service. Washington, DC. American Petroleum Institute.
|
|
|
ASTM E08.04. 01. 2018. Standard Guide for the Verification and Validation of Fatigue Crack Growth Life Prediction Models and Software Implementations of Models Pre-release Draft.
|
|
|
Babolian E, Masouri Z. 2008. Direct method to solve Volterra integral equation of the first kind using operational matrix with block-pulse functions. Journal of Computational and Applied Mathematics, 220: 51-57. doi: 10.1016/j.cam.2007.07.029
|
|
|
Bahr H A, Balke H, Kuna M, Liesk H. 1987 Fracture analysis of a single edge cracked strip under thermal shock. Theoretical and Applied Fracture Mechanics, 8: 33-39.
|
|
|
Bakuckas Jr J G. 2001. Comparison of boundary correction factor solutions for two symmetric cracks in a straight-shank hole. Engineering Fracture Mechanics, 68: 1095-1106. doi: 10.1016/S0013-7944(01)00013-3
|
|
|
Ball D L. 2008. The influence of residual stress on the design of aircraft primary structure. Journal of ASTM International, 5: 1-18.
|
|
|
Ball D L, Watton J D. 2011. Fatigue life variability in large aluminum forgings with residual stress// 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 19th AIAA/ASME /AHS Adaptive Structures Conference, Denver, Colorado, 4-7 April 2011. AIAA 2011-1867.
|
|
|
Ball D L, James M A, Bucci R J, Watton J D. 2014. A detailed evaluation of the effects of bulk residual stress on fatigue in aluminum. Advanced Materials Research, 891: 1205-1211.
|
|
|
Bao R, Zhang X, Yahaya N A. 2010. Evaluating stress intensity factors due to weld residual stresses by the weight function and finite element methods. Engineering Fracture Mechanics, 77: 2550-2566. doi: 10.1016/j.engfracmech.2010.06.002
|
|
|
Barenblatt G I. 1962. The mathematical theory of equilibrium cracks in brittle fracture. Advances in Applied Mechanics, 7: 55-129.
|
|
|
Bazant Z P, Planas J. 1997. Fracture and Size Effect in Concrete and Other Quasibrittle Materials. Boca Raton, Boston, London, New York, Washington D C: CRC Press
|
|
|
Beghini M, Bertini L, Vitale E. 1991. A numerical approach for determining weight functions in fracture mechanics. International Journal for Numerical Methods in Engineering, 32: 595-607. doi: 10.1002/nme.1620320309
|
|
|
Brennan F. 1994. Evaluation of stress intensity factors by multiple reference state weight function approach. Theoretical and Applied Fracture Mechanics, 20: 249-256. doi: 10.1016/0167-8442(94)90017-5
|
|
|
Brennan F, Teh L. 2004. Determination of crack‐tip stress intensity factors in complex geometries by the composition of constituent weight function solutions. Fatigue & Fracture of Engineering Materials & Structures, 27: 1-7.
|
|
|
BS 7910: 2013+A1: 2015. Guide to methods for assessing the acceptability of flaws in metallic structures. BSI Standards Publication. The British Standards Institution.
|
|
|
Buchanan D J, John R, Johnson D A. 1997. Determination of crack bridging stresses from crack opening displacement profiles. International Journal of Fracture, 87: 101-117. doi: 10.1023/A:1007495331890
|
|
|
Budiansky B, Amazigo. 1989. Toughning by aligned, frictionally constrained fibers. Journal of the Mechanics and Physics of Solids, 37: 93-109. doi: 10.1016/0022-5096(87)90006-8
|
|
|
Bueckner H F. 1958. The propagation of cracks and the energy of elastic deformation. Transaction of the ASME, Series E, 80: 1225-1230.
|
|
|
Bueckner H. 1970. A novel principle for the computation of stress intensity factors. Journal of Applied Mathematics and Mechanics, 50: 529-546.
|
|
|
Bueckner H F. 1971. Weight functions for the notched bar. Journal of Applied Mathematics and Mechanics, 51: 97-109.
|
|
|
Cardona D, Barney C, Bowen P. 1993. Micromodelling of effective stress intensities for bridged cracks in fibre-reinforced titanium metal-matrix composites. Composites, 24: 122-128. doi: 10.1016/0010-4361(93)90008-V
|
|
|
Carpinteri A, Massabó R. 1996. Bridged versus cohesive crack in the flexural behavior of brittle-matrix composites. International Journal of Fracture, 81: 125-145. doi: 10.1007/BF00033178
|
|
|
Chang P Y, Yeh P C, Yang J M. 2011. Fatigue crack growth in fibre metal laminates with multiple open holes. Fatigue & Fracture of Engineering Materials & Structures, 35: 93-107.
|
|
|
Chen F, Sun Z, Xu J. 2001. Mode I fracture analysis of the double edge cracked Brazilian disk using a weight function method. International Journal of Rock Mechanics and Mining Sciences (1997)
|
|
|
Chen X, Albrecht P. 1994. Weight functions for eccentric cracks// Fracture Mechanics, 24th volume. ASTM International.
|
|
|
Chen X G, Wu X R, Yan M G. 1992. Dugdale model for strain hardening materials. Engineering Fracture Mechanics, 41: 843-871. doi: 10.1016/0013-7944(92)90236-8
|
|
|
Chen X J, You Y. 2014. Weight functions for multiple edge cracks in a coating. Engineering Fracture Mechanics, 116: 31-40. doi: 10.1016/j.engfracmech.2013.12.012
|
|
|
Chen X, Du C, You M, Jiang S. 2017. Experimental study on water fracture interactions in concrete. Engineering Fracture Mechanics, 179: 314-327. doi: 10.1016/j.engfracmech.2017.04.050
|
|
|
Chen Z. 2012. Finite element modelling of viscosity-dominated hydraulic fractures. Journal of Petroleum Science and Engineering, 88: 136-144.
|
|
|
Collins R, Cartwright D, Gregson P. 1999. A direct complex stress function approach for modelling stiffened panels containing multiple site damage. Theoretical and Applied Fracture Mechanics, 31: 105-117. doi: 10.1016/S0167-8442(99)00005-1
|
|
|
Collins R, Cartwright D. 2001. An analytical solution for two equal-length collinear strip yield cracks. Engineering Fracture Mechanics, 68: 915-924. doi: 10.1016/S0013-7944(00)00086-2
|
|
|
Cox B N, Marshall D B. 1991a. Stable and unstable solutions for bridged cracks in various specimens. Acta Metallurgica et Materialia, 39: 579-589. doi: 10.1016/0956-7151(91)90126-L
|
|
|
Cox B N, Marshall D B. 1991b. The determination of crack bridging forces. International Journal of Fracture, 49: 159-176. doi: 10.1007/BF00035040
|
|
|
Cruse T A, Besuner P M. 1975. Residual life prediction for surface cracks in complex structural details. Journal of Aircraft, 12: 369-375. doi: 10.2514/3.44458
|
|
|
Daniewicz S R. 1994. A closed-form small-scale yielding collinear strip yield model for strain hardening materials. Engineering Fracture Mechanics, 49: 95-103. doi: 10.1016/0013-7944(94)90114-7
|
|
|
Daniewicz S, Bloom J. 1996. An assessment of geometry effects on plane stress fatigue crack closure using a modified strip-yield model. International Journal of Fatigue, 18: 483-490. doi: 10.1016/0142-1123(96)00084-9
|
|
|
Daniewicz S. 1998. A modified strip-yield model for prediction of plasticity-induced closure in surface flaws. Fatigue & Fracture of Engineering Materials & Structures, 21: 885-901.
|
|
|
Daniewicz S, Aveline C. 2000. Strip-yield and finite element analysis of part-through surface flaws. Engineering Fracture Mechanics, 67: 21-39. doi: 10.1016/S0013-7944(00)00032-1
|
|
|
Daniewicz S, Ismonov S. 2010. Simulation and comparison of several crack closure assessment methodologies. International Journal of Fatigue, 32: 428-433. doi: 10.1016/j.ijfatigue.2009.08.008
|
|
|
DARWIN®. 2008. Design Assessment of Reliability With Inspection. DARWIN Theory, Version 6.1. Developed by Southwest Research Institute.
|
|
|
de Matos P, Nowell D. 2007. On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems. Engineering Fracture Mechanics, 74: 1579-1601. doi: 10.1016/j.engfracmech.2006.09.007
|
|
|
Dempsey J, Adamson R, Defranco S. 1995. Fracture analysis of base-edge-cracked reverse-tapered plates. International Journal of Fracture, 69: 281-294. doi: 10.1007/BF00037379
|
|
|
Dempsey J, Mu Z. 2014. Weight function for an edge-cracked rectangular plate. Engineering Fracture Mechanics, 132: 93-103. doi: 10.1016/j.engfracmech.2014.10.023
|
|
|
Deng P, Matsumoto T. 2017. Weight function determinations for shear cracks in reinforced concrete beams based on finite element method. Engineering Fracture Mechanics, 177: 61-78. doi: 10.1016/j.engfracmech.2017.03.046
|
|
|
Dill H D, Saff C R. 1978. Environmental-load interaction effects on crack growth. McDonnell Aircraft Co. , Saint Louis, MO, United States
|
|
|
Dillstrom P, Gunnars J, Unge P, Mangard D. 2018. Procedure for Safety Assessment of Components with Defects. Handbook Edition 5. Report number: 18 ISSN: 2000-0456. Swedish Radiation Safety Authority.
|
|
|
Dong Z, Tang S, Ranjith P G, Lang Y. 2018. A theoretical model for hydraulic fracturing through a single radial perforation emanating from a borehole. Engineering Fracture Mechanics, 196: 28-42. doi: 10.1016/j.engfracmech.2018.04.029
|
|
|
Dong S, Wang Y, Xia Y. 2004. Stress intensity factors for central cracked circular disk subjected to compression. Engineering Fracture Mechanics, 71: 1135-1148. doi: 10.1016/S0013-7944(03)00120-6
|
|
|
Dugdale D S. 1960. Yielding of steel sheets containing slits. Journal of the Mechanics and Physics of Solids, 8: 100-104. doi: 10.1016/0022-5096(60)90013-2
|
|
|
Elber W. 1970. Fatigue crack closure under cyclic tension. Engineering Fracture Mechanics, 2: 37-45. doi: 10.1016/0013-7944(70)90028-7
|
|
|
FAA. 2010. Aging airplane program: widespread fatigue damage. Federal Register Rules and Regulations, 75: 69746-69789.
|
|
|
Fett T, Mattheck C, Munz D. 1987. On the calculation of crack opening displacement from the stress intensity factor. Engineering Fracture Mechanics, 7: 697-715.
|
|
|
Fett T. 1988. Limitations of the Petroski-Achenbach procedure demonstrated for a simple load case. Engineering Fracture Mechanics, 29: 713-716. doi: 10.1016/0013-7944(88)90173-7
|
|
|
Fett T. 1992. Direct determination of weight functions from reference loading cases and geometrical conditions. Engineering Fracture Mechanics, 42: 435-444. doi: 10.1016/0013-7944(92)90165-B
|
|
|
Fett T, Diegele E, Munz D, Rizzi G. 1996. Weight functions for edge cracks in thin surface layers. International Journal of Fracture, 81: 205-215. doi: 10.1007/BF00039571
|
|
|
Fett T. 1997. A semi-analytical study of the edge-cracked circular disc by use of the boundary collocation method. Engineering Fracture Mechanics, 56: 331-346. doi: 10.1016/S0013-7944(96)00069-0
|
|
|
Fett T, Munz D. 1997. Stress Intensity Factors and Weight Functions. Southampton, UK. Computational Mechanics Publications
|
|
|
Fett T, Bahr H. 1999. Mode I stress intensity factors and weight functions for short plates under different boundary conditions. Engineering Fracture Mechanics, 62: 593-606. doi: 10.1016/S0013-7944(99)00014-4
|
|
|
Fett T, Munz D, Yang Y Y. 2000a. Direct adjustment procedure for weight functions of graded materials. Fatigue & Fracture of Engineering Materials & Structures, 23: 191-198.
|
|
|
Fett T. 2001. Stress intensity factors and T-stress for internally cracked circular disks under various boundary conditions. Engineering Fracture Mechanics, 68: 1119-1136. doi: 10.1016/S0013-7944(01)00025-X
|
|
|
Fett T. 2002. Stress intensity factors and T-stress for single and double edge cracked circular disks under mixed boundary conditions. Engineering Fracture Mechanics, 69: 69-83. doi: 10.1016/S0013-7944(01)00078-9
|
|
|
Fett T, Pham V-B, Bahr H-A. 2004. Weight functions for kinked semi-infinite cracks. Engineering Fracture Mechanics, 71: 1987-1995. doi: 10.1016/j.engfracmech.2003.10.003
|
|
|
Fett T. 2008. Stress intensity factors, T-stresses, weight functions. IKM 50. Institute of Ceramics in Mechanical Engineering, University of Karlsruhe, Germany.
|
|
|
Fitzpatrick M E, Edwards L. 1998. Fatigue crack/residual stress field interactions and their implications for damage tolerant design. Journal of Materials Engineering and Performance, 7: 190-198. doi: 10.1361/105994998770347918
|
|
|
Fleck N, Sutcliffe M, Sivashanker S, Xin X. 1996. Compressive R-curve of a carbon fibre-epoxy matrix composite. Composites Part B:Engineering, 27: 531-541.
|
|
|
Fujimoto W. 1976. Determination of crack growth and fracture toughness parameters for surface flaws emanating from fastener holes// 17th Structures, Structural Dynamics and Materials Conference: 1552.
|
|
|
Gao H, Rice J R. 1987. Somewhat circular tensile cracks. International Journal of Fracture, 33: 155-174. doi: 10.1007/BF00013168
|
|
|
Gao Y, Li B, Wang J, Feng X Q. 2021. Fracture toughness analysis of helical fiber-reinforced biocomposites. Journal of the Mechanics and Physics of Solids, 146: 104206. doi: 10.1016/j.jmps.2020.104206
|
|
|
Garagash D, Detournay E. 1997. An analysis of the influence of the pressurization rate on the borehole breakdown pressure. International Journal of Solids and Structures, 34: 3099-3118. doi: 10.1016/S0020-7683(96)00174-6
|
|
|
Glinka G, Shen G. 1991. Universal features of weight functions for cracks in mode I. Engineering Fracture Mechanics, 40: 1135-1146. doi: 10.1016/0013-7944(91)90177-3
|
|
|
Glinka G. 1996. Development of weight functions and computer integration procedures for calculating stress intensity factors around cracks subjected to complex stress fields. Stress and Fatigue-Fracture Design, Petersburg Ontario, Canada, Progress Report
|
|
|
Glinka G. 2020. Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Ontario, Canada. Private communications.
|
|
|
Görner F, Mattheck C, Morawietz P, Munz D. 1985. Limitations of the Petroski-Achenbach crack opening displacement approximation for the calculation of weight functions. Engineering Fracture Mechanics, 22: 269-277. doi: 10.1016/S0013-7944(85)80029-1
|
|
|
Grandt A F. 1975. Stress intensity factors for some through-cracked fastener holes. International Journal of Fracture, 11: 283-294. doi: 10.1007/BF00038895
|
|
|
Gregory R. 1977. A circular disc containing a radial edge crack opened by a constant internal pressure. Mathematical Proceedings of the Cambridge Philosophical Society, 81: 497-521. doi: 10.1017/S030500410005355X
|
|
|
Gregory R D. 1979. The edge-cracked circular disc under symmetric pin-loading. Mathematical Proceedings of the Cambridge Philosophical Society, 85: 523-538. doi: 10.1017/S030500410005595X
|
|
|
Gregory R D. 1989. The spinning circular disc with a radial edge crack: An exact solution. International Journal of Fracture, 41: 39-50. doi: 10.1007/BF00014836
|
|
|
Guagliano M, Vergani L. 2001. Mode I stress intensity factors for curved cracks in gears by a weight functions method. Fatigue & Fracture of Engineering Materials & Structures, 24: 41-52.
|
|
|
Guidera J, Lardner R. 1975. Penny-shaped cracks. Journal of Elasticity, 5: 59-73. doi: 10.1007/BF01389258
|
|
|
Guo W, Zhang J, Guo W. 2021. Two-dimensional weight function of stress intensity factors for corner cracks emanating from a circular hole. Engineering Fracture Mechanics, 252: 107821. doi: 10.1016/j.engfracmech.2021.107821
|
|
|
Guo Y J, Wu X R. 1998. A theoretical model for predicting fatigue crack growth rates in fibre‐reinforced metal laminates. Fatigue & Fracture of Engineering Materials & Structures, 21: 1133-1145.
|
|
|
Guo Y J, Wu X R. 1999. Bridging stress distribution in center-cracked fiber reinforced metal laminates: modeling and experiment. Engineering Fracture Mechanics, 63: 147-163. doi: 10.1016/S0013-7944(99)00018-1
|
|
|
Harter J A. 2008. AFGROW user guider and technical manual. Wright-Patterson Air Force Base OH 45433-7542.
|
|
|
HB 7705—2001. 2001. 中华人民共和国航空行业标准: 金属材料疲劳小裂纹扩展速率试验方法.
|
|
|
He X, Dong Y, Yang B, Li Y. 2018. A wide range stress intensity factor solution for an eccentrically cracked middle tension specimen with clamped ends. Engineering Fracture Mechanics, 191: 461-475. doi: 10.1016/j.engfracmech.2018.01.007
|
|
|
Heaton M. 1976. On the calculation of stress intensity factors due to thermal and residual stress fields. CEGB Research Report NW/SSD/RR/158.
|
|
|
Hill M R, Kim J. 2016. Weight functions for a finite width plate with a radial crack at a circular hole. AFGROW Workshop.
|
|
|
Hutchinson J W. 1979. A course on nonlinear fracture mechanics: Department of Solid Mechanics, Technical University of Denmark.
|
|
|
Ince R. 2012a. Determination of concrete fracture parameters based on peak-load method with diagonal split-tension cubes. Engineering Fracture Mechanics, 82: 100-114. doi: 10.1016/j.engfracmech.2011.11.026
|
|
|
Ince R. 2012b. Determination of the fracture parameters of the Double-K model using weight functions of split-tension specimens. Engineering Fracture Mechanics, 96: 416-432. doi: 10.1016/j.engfracmech.2012.08.024
|
|
|
Irwin G R. 1957. Analysis of stresses and strains near the end of a crack traversing a plate. Journal of Applied Mechanics, 24: 361-364. doi: 10.1115/1.4011547
|
|
|
Ismonov S, Daniewicz S. 2010. Simulation and comparison of several crack closure assessment methodologies using three-dimensional finite element analysis. International Journal of Fatigue, 32: 1322-1329. doi: 10.1016/j.ijfatigue.2010.01.016
|
|
|
Jin X, Zeng Y, Ding S, et al. 2017. Weight function of stress intensity factor for single radial crack emanating from hollow cylinder. Engineering Fracture Mechanics, 170: 77-86. doi: 10.1016/j.engfracmech.2016.11.031
|
|
|
Jin Z, Wang X. 2011. Point load weight functions for semi-elliptical cracks in finite thickness plate. Journal of ASTM International, 9: JAI103962.
|
|
|
Jin Z, Wang X. 2013. Weight functions for the determination of stress intensity factor and T-stress for semi-elliptical cracks in finite thickness plate. Fatigue & Fracture of Engineering Materials & Structures, 36: 1051-1066.
|
|
|
Jing Z, Wu X R. 2015. Wide-range weight functions and stress intensity factors for arbitrarily shaped crack geometries using complex Taylor series expansion method. Engineering Fracture Mechanics, 138: 215-232. doi: 10.1016/j.engfracmech.2015.03.006
|
|
|
John R, Kaldon S G, Johnson D A, Coker D. 1995. Weight function for a single edge cracked geometry with clamped ends. International Journal of Fracture, 72: 145-158. doi: 10.1007/BF00042825
|
|
|
Jones I. 1998. A wide range weight function for a single edge cracked geometry with clamped ends. International Journal of Fracture, 89: 1-18. doi: 10.1023/A:1007463205924
|
|
|
Karihaloo B, Xiao Q Z. 2003. Comprehensive Structural Integrity: Linear and Non-linear Fracture Mechanics. Pergamon: Elsevier, 81-212.
|
|
|
Kaya A, Erdogan F. 1980. Stress intensity factors and COD in an orthotropic strip. International Journal of Fracture, 16: 171-190. doi: 10.1007/BF00012620
|
|
|
Kiciak A, Glinka G, Eman M, Shiratori M. 1998. Weight functions and stress intensity factors for corner quarter-elliptical crack in finite thickness plate subjected to in-plane loading. Engineering Fracture Mechanics, 60: 221-238. doi: 10.1016/S0013-7944(98)00006-X
|
|
|
Kim J, Lee S-B. 2000. Prediction of crack opening stress for part-through cracks and its verification using a modified strip-yield model. Engineering Fracture Mechanics, 66: 1-14. doi: 10.1016/S0013-7944(00)00006-0
|
|
|
Kumar S, Barai S V. 2010a. Determining the double-K fracture parameters for three-point bending notched concrete beams using weight function. Fatigue & Fracture of Engineering Materials & Structures, 33: 645-660.
|
|
|
Kumar S, Barai S. 2010b. Determining double-K fracture parameters of concrete for compact tension and wedge splitting tests using weight function. Engineering Fracture Mechanics, 76: 935-948.
|
|
|
Kumar S, Barai S V. 2011. Concrete Fracture Models and Applications. Springer Science & Business Media.
|
|
|
Kuna M. 2013. Finite Elements in Fracture Mechanics. Springer Science & Business Media. .
|
|
|
Kuutti J, Virkkunen I. 2019. The effect of subsurface crack opening on the stress intensity factor under cyclic thermal loads. Engineering Fracture Mechanics, 218: 106600. doi: 10.1016/j.engfracmech.2019.106600
|
|
|
Lee H Y, Biglari F R, Wimpory R, Nikbin K M. 2006. Treatment of residual stress in failure assessment procedure. Engineering Fracture Mechanics, 73: 1755-1771. doi: 10.1016/j.engfracmech.2006.03.005
|
|
|
Lee H Y, Hong C S. 1995. A new weight function approach using indirect boundary integral method. Engineering Fracture Mechanics, 52: 1087-1105. doi: 10.1016/0013-7944(95)00055-Z
|
|
|
Lee Y D, Mcclung R, Chell G. 2008. An efficient stress intensity factor solution scheme for corner cracks at holes under bivariant stressing. Fatigue & Fracture of Engineering Materials & Structures, 31: 1004-1016.
|
|
|
Li V C, Lin Z, Matsumoto T. 1998. Influence of fiber bridging on structural size-effect. International Journal of Solids and Structures, 35: 4223-4238. doi: 10.1016/S0020-7683(97)00311-9
|
|
|
Lim W-K, Song J-H, Sankar B V. 2003. Effect of ring indentation on fatigue crack growth in an aluminum plate. International Journal of Fatigue, 25: 1271-1277. doi: 10.1016/j.ijfatigue.2003.08.011
|
|
|
Lindhagen J E, Gamstedt E K, Berglund L A. 2000. Application of bridging-law concepts to short-fibre composites Part 3: Bridging law derivation from experimental crack profiles. Composites Science and Technology, 60: 2883-2894. doi: 10.1016/S0266-3538(99)00177-3
|
|
|
Liu J Z, Wu X R. 1997. Study on fatigue crack closure behavior for various cracked geometries. Engineering Fracture Mechanics, 57: 475-491. doi: 10.1016/S0013-7944(97)00052-0
|
|
|
Liu T, Tomsett A, Zhang H. 2000. Thermal shock behaviour of industrial carbon anodes. Carbon, 38: 1401-1409. doi: 10.1016/S0008-6223(99)00275-4
|
|
|
Liu Z, Xu W, Yu Y, Wu X. 2019. Weight functions and stress intensity factors for two unequal-length collinear cracks in an infinite sheet. Engineering Fracture Mechanics, 209: 173-186. doi: 10.1016/j.engfracmech.2019.01.025
|
|
|
Lorenzo J, Cartwright D, Aliabadi M. 1994. Boundary-element weight-function analysis for crack surface displacements and strip-yield cracks. Engineering Analysis with Boundary Elements, 13: 283-289. doi: 10.1016/0955-7997(94)90054-X
|
|
|
Love A E H. 1944. A Treatise on the Mathematical Theory of Elasticity. Courier Corporation.
|
|
|
Lu Y-L, Liu H, Jia H, Yu Z-Q. 2001. Finite element implementation of thermal weight function method for calculating transient SIFs of a body subjected to thermal shock. International Journal of Fracture, 108: 95-117. doi: 10.1023/A:1007665116534
|
|
|
Lyness J N, Moler C B. 1967. Numerical differentiation of analytic functions. SIAM Journal on Numerical Analysis, 4: 202-210. doi: 10.1137/0704019
|
|
|
Mattheck C, Morawietz P, Munz D. 1983. Stress intensity factor at the surface and at the deepest point of a semi-elliptical surface crack in plates under stress gradients. International Journal of Fracture, 23: 201-212. doi: 10.1007/BF00028823
|
|
|
Mawatari T, Nelson D. 2011. Method for efficient computation of stress intensity factors from weight functions by singular point elimination. Engineering Fracture Mechanics, 78: 2713-2730. doi: 10.1016/j.engfracmech.2011.07.006
|
|
|
McClung R C. 1994. Finite element analysis of specimen geometry effects on fatigue crack closure. Fatigue & Fracture of Engineering Materials & Structures, 17: 861-872.
|
|
|
McClung R C, Enright M P, Lee Y-D, Huyse L J. 2004. Efficient fracture design for complex turbine engine components. Turbo Expo: Power for Land, Sea, and Air, 41715: 291-300.
|
|
|
McClung R C, Leverant G, Enright M. 2008. Turbine rotor material design—Phase II. Washington, DC: FAA Grant.
|
|
|
McClung R C, Lee Y-D, Cardinal J W, Guo Y. 2013. The pursuit of K: Reflections on the current state-of-the-art in stress intensity factor solutions for practical aerospace applications// 27th ICAF Symposium, Jerusalem, 2013.
|
|
|
McEvily A J. 2002. Metal Failures: Mechanisms, Analysis, Prevention. John Wiley & Sons, Inc. New
|
|
|
Meng Q, Li B, Li T, Feng X Q. 2018. Effects of nanofiber orientations on the fracture toughness of cellulose nanopaper. Engineering Fracture Mechanics, 194: 35-361.
|
|
|
Millwater H R, Enright M P, Fitch S H. 2007. Convergent zone-refinement method for risk assessment of gas turbine disks subject to low-frequency metallurgical defects. Journal of Engineerng for Gas Turbines and Power, 129: 827-835. doi: 10.1115/1.2431393
|
|
|
NASCRACTM. 1994. Fracture Mechanics Life Analytical Methods Verification Testing (Verification and Validation of NASCRACTM), NAS8-38103. NASA-CR-196555. 1994. (Nichols Research Corp. )
|
|
|
NASGRO®. 2012. Fracture mechanics and fatigue crack growth analysis software, Version 7.0. NASA Johnson Space Center and Southwest Research Institute.
|
|
|
Nabavi SM, Rekavandi S S H. 2020. A weight function for multiple longitudinal cracks in functionally graded hollow cylinders. Theoretical and Applied Fracture Mechanics, 110: 102789.
|
|
|
Nazmul I M, Matsumoto. 2004. Inverse analysis to determine re-bars’ force from external crack widths measurement. Journal of Applied Mechanics, 7: 1179-1186. doi: 10.2208/journalam.7.1179
|
|
|
Nazmul I M, Matsumoto. 2008a. High resolution COD image analysis for health mornitoring of reinforced concrete structures through inverse analsis. International Journal of Solids and Structures, 45: 159-174. doi: 10.1016/j.ijsolstr.2007.07.014
|
|
|
Nazmul I M, Matsumoto. 2008b. Regularization of inverse problems in reinforced concrete fracture. Journal of Engineering Mechanics, 134: 811-819. doi: 10.1061/(ASCE)0733-9399(2008)134:10(811)
|
|
|
Newman Jr J C. 1983. A nonlinear fracture mechanics approach to the growth of small cracks. NASA Langley Research Center, Hamptong, VA, USA.
|
|
|
Newman Jr J C. 1986. Evaluation of the crack-tip-opening-displacement (VR) resistance curve method// The Crack Tip Opening Displacement in Elastic-Plastic Fracture Mechanics. Springer, 157-176.
|
|
|
Newman Jr J C. Fastran-II. 1992. Fatigue Crack Growth Structural Analysis Program, NASA TM-104159. National Aeronautics and Space Administration, Langley, VA.
|
|
|
Newman Jr J C, Wu X R, Venneri S L, Li C G. 1994. Small-crack effects in high-strength aluminum alloys, NASA RP-1309.
|
|
|
Newman Jr J C, Wu X R. 2021. Private communications of stress intensity factors on corner crack at a circular hole in infinite/finite plate. March 2021.
|
|
|
Ng S W, Lau K J. 1999. A new weight function expression for through cracks. Engineering Fracture Mechanics, 64: 515-537. doi: 10.1016/S0013-7944(99)00095-8
|
|
|
Nishimura T. 1991. Stress intensity factors of multiple cracked sheet with riveted stiffeners. Journal of Engineering Materials and Technology, 113: 280-284. doi: 10.1115/1.2903406
|
|
|
Nilsson K F, Hutchinson J. 1994. Interaction between a major crack and small crack damage in aircraft sheet material. International Journal of Solids and Structures, 31: 2331-2346. doi: 10.1016/0020-7683(94)90155-4
|
|
|
Niu X, Glinka G. 1987. On the “Limitations of the Petroski-Achenbach crack opening displacement approximation for the calculation of weight function”-Do they really exist? Engineering Fracture Mechanics, 26: 701-706. doi: 10.1016/0013-7944(87)90135-4
|
|
|
Ojdrovic R P, Petroski H J. 1991. Weight functions from multiple reference states and crack profile derivatives. Engineering Fracture Mechanics, 39: 105-111. doi: 10.1016/0013-7944(91)90026-W
|
|
|
Oliveira R, Wu X R. 1987. Stress intensity factors for axial cracks in hollow cylinders subjected to thermal shock. Engineering Fracture Mechanics, 27: 185-197. doi: 10.1016/0013-7944(87)90167-6
|
|
|
Orange T W. 1972. Crack shapes and stress intensity factors for edge-cracked specimens// Proceedings of the 1971 National Symposium on Fracture Mechanics: Part I. ASTM STP 513, 71-78.
|
|
|
Orange T W. 1985. Wide-range weight functions for the strip with a single edge crack// Fracture Mechanics: Sixteenth Symposium.
|
|
|
Orynyak I, Borodii M. 1995. Point weight function method application for semi-elliptical mode I cracks. International Journal of Fracture, 70: 117-124. doi: 10.1007/BF00034135
|
|
|
Orynyak I, Borodii M, Torop V. 1994. Approximate construction of a weight function for quarter-elliptical, semi-elliptical and elliptical cracks subjected to normal stresses. Engineering Fracture Mechanics, 49: 143-151. doi: 10.1016/0013-7944(94)90118-X
|
|
|
Östlund S, Nilsson F. 1993. Cohesive modelling of process regions for cracks in linear elastic structures—fundamental aspects. Fatigue & Fracture of Engineering Materials & Structures, 16: 215-235.
|
|
|
Östlund S. 1995. Fracture modelling of brittle matrix composites with spatially dependent crack bridging. Fatigue & Fracture of Engineering Materials & Structures, 18: 1213-1230.
|
|
|
Östlund S, Kärenlampi P. 2001. Structural geometry effect on the size-scaling of strength. International Journal of Fracture, 109: 141-151. doi: 10.1023/A:1011045510152
|
|
|
Parker A P. 1982. Stress intensity factors, crack profiles, and fatigue crack growth rates in residual stress fields//Residual Stress Effects in Fatigue. ASTM International.
|
|
|
Petroski H, Achenbach J. 1978. Computation of the weight function from a stress intensity factor. Engineering Fracture Mechanics, 10: 257-266. doi: 10.1016/0013-7944(78)90009-7
|
|
|
R6. 2009. Assessment of the integrity of structures containing defects. Revision 4. British Energy Generation Ltd (BEGL), Barnwood, Gloucester.
|
|
|
Ribeiro R L, Hill M R. 2016. A benchmark fracture mechanics solution for a two-dimensional eigenstrain problem considering residual stress, the stress intensity factor, and superposition. Engineering Fracture Mechanics, 163: 313-326. doi: 10.1016/j.engfracmech.2016.06.007
|
|
|
Rice J R. 1972. Some remarks on elastic crack-tip stress fields. International Journal of Solids and Structures, 8: 751-758. doi: 10.1016/0020-7683(72)90040-6
|
|
|
Rice J R. 1989. Weight function theory for three-dimensional elastic crack analysis// Fracture Mechanics: Perspectives and Directions (ASTM Twentieth Symposium).
|
|
|
Saff C R, Sanger K B. 1984. Part-through flaw stress intensity factors developed by a slice synthesis technique. Fracture Mechanics: Fifteenth Symposium, ASTM STP 833.
|
|
|
Schajer G S, Prime M B. 2006. Use of inverse solutions for residual stress measurements. Journal of Engineering Materials and Technology, 128: 375-382. doi: 10.1115/1.2204952
|
|
|
Schijve J. 1992. Multiple-site-damage fatigue of riveted joints: International workshop on structural integrity of aging airplanes, Atlanta, 31 March-2 April, 1992. Delft University of Technology, Faculty of Aerospace Engineering, Report LR-679.
|
|
|
Schneider G, Danzer R. 1989. Calculation of the stress intensity factor of an edge crack in a finite elastic disc using the weight function method. Engineering Fracture Mechanics, 34: 547-552. doi: 10.1016/0013-7944(89)90117-3
|
|
|
Schneider G A, Petzow G. 1991. Thermal shock testing of ceramics—A new testing method. Journal of the American Ceramic Society, 74: 98-102. doi: 10.1111/j.1151-2916.1991.tb07303.x
|
|
|
Sha G T, Yang C. 1986. Weight functions of radial cracks emanating from a circular hole in a plate// Fracture Mechanics: Seventeenth Volume. ASTM International.
|
|
|
Sham T L. 1987. A unified finite element method for determining weight functions in two and three dimensions. International Journal of Solids and Structures, 23: 1357-1372. doi: 10.1016/0020-7683(87)90002-3
|
|
|
Shao Y, Zhao H P, Feng X Q, Gao H. 2012. Discontinuous crack-bridging model for fracture toughness analysis of nacre. Journal of the Mechanics and Physics of Solids, 60: 1400-1419. doi: 10.1016/j.jmps.2012.04.011
|
|
|
Shen G, Glinka G. 1991. Weight functions for a surface semi-elliptical crack in a finite thickness plate. Theoretical and Applied Fracture Mechanics, 15: 247-255. doi: 10.1016/0167-8442(91)90023-D
|
|
|
Shivakumar V, Forman R G. 1980. Green's function for a crack emanating from a circular hole in an infinite sheet. International Journal of Fracture, 16: 305-316. doi: 10.1007/BF00018234
|
|
|
Sih G C. 1964. Boundary problems for longitudinal shear cracks// Proceedings of Second Conference of Theoretical and Appllied Mechanics, 2: 117-130.
|
|
|
Sivashanker S. 1998. Damage growth in carbon fibre–PEEK unidirectional composites under compression. Materials Science and Engineering:A, 249: 259-276. doi: 10.1016/S0921-5093(98)00484-5
|
|
|
Sobotka J C, Mcclung R C. 2019. Verification of stress-intensity factor solutions by uncertainty quantification. Journal of Verification, Validation and Uncertainty Quantification, 4: 021003. doi: 10.1115/1.4044868
|
|
|
Stefanescu D. 2004. Measurement and prediction of fatigue crack growth from cold expanded holes Part 2: Prediction of fatigue crack growth from cold expanded holes. The Journal of Strain Analysis for Engineering Design, 39: 41-52. doi: 10.1177/030932470403900104
|
|
|
Swift T. 1994. Damage tolerance capability. International Journal of Fatigue, 16: 75-94. doi: 10.1016/0142-1123(94)90446-4
|
|
|
Tada H, Paris P C, Irwin G R. 1973. The Stress Analysis of Cracks Handbook, Del Research Corp. Hellertown, PA.
|
|
|
Tada H, Paris P C, Irwin G R. 1985. The Stress Analysis of Cracks Handbook, 2nd Edition. Paris Productions Inc, St.Louis.
|
|
|
Tada H, Paris P C, Irwin G R. 2000. The Stress Analysis of Cracks Handbook, 3rd Edition. New York: ASME Press.
|
|
|
Tan P W, Raju I S, Shivakumar K N, Newman Jr J C. 1988. A re-evaluation of finite element models and stress intensity factors for surface cracks emanating from stress concentrations. NASA TM-101527.
|
|
|
Tan P W, Raju I S, Shivakumar K N, Newman Jr J C. 1990. Evaluation of finite-element models and stress intensity factors for surface cracks emanating from stress concentrations// Surface-Crack Growth: Models, Experiments, and Structures: ASTM STP 1060. 1990: 34-48.
|
|
|
Teh L S. 2002. Library of geometric influences for stress intensity factor weight functions. University of London, University College London (United Kingdom).
|
|
|
Teh L S, Brennan F P. 2005. Stress intensity factors for 2-D semicircular notches using the superposition of SIF weight functions. Fatigue and Fracture of Engineering Materials and Structures, 28: 423-435. doi: 10.1111/j.1460-2695.2005.00872.x
|
|
|
Teh L, Love A, Brennan F. 2006. Mode I stress intensity factors for edge cracks emanating from 2-D U-notches using composition of SIF weight functions. International Journal of Fatigue, 28: 355-365. doi: 10.1016/j.ijfatigue.2005.07.021
|
|
|
Teh L, Brennan F. 2007. Evaluation of mode I stress intensity factors for edge cracks from 2-D V-notches using composition of constituent SIF weight functions. International Journal of Fatigue, 29: 1253-1268. doi: 10.1016/j.ijfatigue.2006.10.012
|
|
|
Terada H. 1976. An analysis of the stress intensity factor of a crack perpendicular to the welding bead. Engineering Fracture Mechanics, 8: 441-444. doi: 10.1016/0013-7944(76)90024-2
|
|
|
Tetelman A S, McEvily Jr A J. 1967. Fracture of Structural Materials. New York: John Wiley & Sons, INC.
|
|
|
Tong D H, Wu X R. 2013. Determination of crack surface displacements for cracks emanating from a circular hole using weight function method. Fatigue & Fracture of Engineering Materials & Structures, 36: 340-348.
|
|
|
Tong D-H, Wu X R. 2014. Analysis of crack opening stresses for center-and edge-crack tension specimens. Chinese Journal of Aeronautics, 27: 291-298. doi: 10.1016/j.cja.2013.07.007
|
|
|
Tong D H, Wu X R. 2015. Determination of crack surface displacements for a radial crack emanating from a semi-circular notch using weight function method. Acta Mechanica Solida Sinica, 28: 305-312. doi: 10.1016/S0894-9166(15)30017-3
|
|
|
Tsai C H, Ma C C. 1989. Weight functions for cracks in finite rectangular plates. International Journal of Fracture, 40: 43-63. doi: 10.1007/BF01150865
|
|
|
Tsai C H, Ma C C. 1992. Thermal weight function of cracked bodies subjected to thermal loading. Engineering Fracture Mechanics, 41: 27-40. doi: 10.1016/0013-7944(92)90092-S
|
|
|
Wang K, Zhang Q, Xia X, Wang L. 2015. Analysis of hydraulic fracturing in concrete dam considering fluid–structure interaction using XFEM-FVM model. Engineering Failure Analysis, 57: 399-412. doi: 10.1016/j.engfailanal.2015.07.012
|
|
|
Wang R, Kemeny J M. 1993. Micromechanical modeling of tuffaceous rock for application in nuclear waste storage. International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 30: 1351-1357.
|
|
|
Wang X, Lambert S. 1995. Stress intensity factors for low aspect ratio semi-elliptical surface cracks in finite thickness plates subjected to nonuniform stresses. Engineering Fracture Mechanics, 51: 517-532. doi: 10.1016/0013-7944(94)00311-5
|
|
|
Wang X, Lambert S. 1997. Stress intensity factors and weight functions for high aspect ratio semi-elliptical surface cracks in finite-thickness plates. Engineering Fracture Mechanics, 57: 13-24. doi: 10.1016/S0013-7944(97)00018-0
|
|
|
Wang X, Glinka G. 2009. Determination of approximate point load weight functions for embedded elliptical cracks. International Journal of Fatigue, 31: 1816-1827. doi: 10.1016/j.ijfatigue.2008.12.002
|
|
|
Wang Y C, Zhu Y B, He Z Z, Wu H A. 2020. Multiscale investigations into the fracture toughness of SiC/graphene composites: Atomistic simulations and crack-bridging model. Ceramics International 46: 29101-29110.
|
|
|
Wagner D, Millwater H. 2012. 2D weight function development using a complex Taylor series expansion method. Engineering Fracture Mechanics, 86: 23-37. doi: 10.1016/j.engfracmech.2012.02.006
|
|
|
Wanhill R. 2003. Milestone case histories in aircraft structural integrity. Comprehensive Structural Integrity, 1: 61-72.
|
|
|
Wigglesworth L. 1957. Stress distribution in a notched plate. Mathematika, 4: 76-96. doi: 10.1112/S002557930000111X
|
|
|
Wu S J, Knott J F. 2001. Comments on spread of plasticity from edge crack close to interface of dissimilar metal joint. Science and Technology of Welding and Joining, 6: 1-8. doi: 10.1179/136217101101538479
|
|
|
Wu X, Bowen P. 2000. Fatigue crack growth resistance of unidirectional fiber reinforced titanium metal matrix composites under transverse loading. Metallurgical and Materials Transactions A, 31A: 2083-2092.
|
|
|
Wu X R, Carlsson J. 1983. The generalised weight function method for crack problems with mixed boundary conditions. Journal of the Mechanics and Physics of Solids, 31: 485-497. doi: 10.1016/0022-5096(83)90012-1
|
|
|
Wu X R. 1984. Approximate weight functions for center and edge cracks in finite bodies. Engineering Fracture Mechanics, 20: 35-49. doi: 10.1016/0013-7944(84)90113-9
|
|
|
Wu X R, Carlsson A J. 1991. Weight Functions and Stress Intensity Factor Solutions. Oxford, England: Pergamon Press
|
|
|
Wu X R. 1991a. The arbitrarily loaded single-edge cracked circular disc; accurate weight function solutions. International Journal of Fracture, 49: 239-256. doi: 10.1007/BF00042194
|
|
|
Wu X R. 1991b. On the influence of reference load case on the crack face weight functions. International Journal of Fracture, 48: 179-192. doi: 10.1007/BF00036630
|
|
|
Wu X R. 1992. Analytical wide-range weight functions for various finite cracked bodies. Engineering Analysis with Boundary Elements, 9: 307-322. doi: 10.1016/0955-7997(92)90016-Z
|
|
|
Wu X R. 1993. Application of weight function method for crack analysis in thermal stress fields.//in Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics. Springer: 119-141
|
|
|
Wu X R, Newman Jr J C, Zhao W, et al. 1998. Small-crack growth and fatigue life predictions for high-strength aluminium alloys. Part I: Experimental and fracture mechanics analysis. Fatigue & Fracture of Engineering Materials & Structures, 21: 1289-1306.
|
|
|
Wu X R, Tong D H. 2014. Determination of stress intensity factors and crack-line stresses from crack mouth opening displacements: an inverse weight function approach// 20th European Conference on Fracture: Fracture at All Scales, Trondheim, Norway.
|
|
|
Wu X R, Tong D H. 2018. Evaluation of various analytical weight function methods base on exact K-solutions of an edge-cracked circular disc. Engineering Fracture Mechanics, 189: 64-80. doi: 10.1016/j.engfracmech.2017.09.024
|
|
|
Wu X R, Tong D H, Zhao X C, Xu W. 2018a. Review and evaluation of weight functions and stress intensity factors for edge-cracked finite-width plate. Engineering Fracture Mechanics, 195: 200-221. doi: 10.1016/j.engfracmech.2018.04.001
|
|
|
Wu X R, Zhao X C, Xu W, Tong D H. 2018b. Discussions on weight functions and stress intensity factors for radial crack(s) emanating from a circular hole in an infinite plate. Engineering Fracture Mechanics, 192: 192-204. doi: 10.1016/j.engfracmech.2018.02.001
|
|
|
Wu X R. 2019. A review and verification of analytical weight function methods in fracture mechanics. Fatigue & Fracture of Engineering Materials & Structures, 42: 2017-2042.
|
|
|
Wu X R, Xu W. 2022. Weight Function Methods in Fracture Mechanics: Theory and Applications. Springer Nature and China Aviation Publishing & Media Co. LTD. ISBN: 978-981-16-8960-4
|
|
|
Xiao Q, Karihaloo B L. 2002. Approximate Green's functions for singular and higher order terms of an edge crack in a finite plate. Engineering Fracture Mechanics, 69: 959-981. doi: 10.1016/S0013-7944(01)00114-X
|
|
|
Xu R X, Wu X R. 1989. A weight function approach to stress-intensity factors for half-elliptical surface cracks in cylindrical pressure vessels subjected to thermal shock. International Journal of Pressure Vessels and Piping, 39: 375-391. doi: 10.1016/0308-0161(89)90108-7
|
|
|
Xu W, Wu X R, Wang H. 2011. Weight functions and strip yield solution for two equal-length collinear cracks in an infinite sheet. Engineering Fracture Mechanics, 78: 2356-2368. doi: 10.1016/j.engfracmech.2011.05.007
|
|
|
Xu W, Wu X R. 2012. Weight functions and strip-yield model analysis for three collinear cracks. Engineering Fracture Mechanics, 85: 73-87. doi: 10.1016/j.engfracmech.2012.02.009
|
|
|
Xu W, Wang H, Wu X R, Zhang X J. 2014. A novel method for residual strength prediction for sheets with multiple site damage: Methodology and experimental validation. International Journal of Solids and Structures, 51: 551-565. doi: 10.1016/j.ijsolstr.2013.10.012
|
|
|
Xu W, Waas A M. 2017. Multiple solutions in cohesive zone models of fracture. Engineering Fracture Mechanics, 177: 104-122. doi: 10.1016/j.engfracmech.2017.03.026
|
|
|
Xu W, Rao D, Wu X, Tong D H. 2020a. Wide‐range and accurate mixed‐mode weight functions and stress intensity factors for cracked discs. Fatigue & Fracture of Engineering Materials & Structures, 43: 1022-1037.
|
|
|
Xu W, Zhang C, Wu X R, Yu Y. 2020b. Weight function method and its application for orthotropic single edge notched specimens. Composite Structures, 252: 112695. doi: 10.1016/j.compstruct.2020.112695
|
|
|
Zerbst U, Schwalbe K-H, Anisworth R A. 2003. Comprehensive Structural Integrity: An Overview of Failure Assessment Methods in Codes and Standards, Vol. 7 (7.01): 1-48. Eds. Milne I, Ritchie R O, Karihaloo B, Elsevier Pergamon.
|
|
|
Zerbst U, Vormwald M, Andersch C, Mädler K. 2005. The development of a damage tolerance concept for railway components and its demonstration for a railway axle. Engineering Fracture Mechanics, 72: 209-239. doi: 10.1016/j.engfracmech.2003.11.011
|
|
|
Zerbst U, Schodel M, Webster S, Ainsworth R. 2007. Fitness-for-service Fracture Assessment of Structures Containing Cracks - A Workbook Based on European SINTAP/FITNET Procedure. 1st edition. Elsevier Ltd.
|
|
|
Zhang B, Xu W, Wu X R, Yu Y. 2020. Stress intensity factors and plastic zones of stiffened panels with multiple collinear cracks. Theoretical and Applied Fracture Mechanics, 110: 102816. doi: 10.1016/j.tafmec.2020.102816
|
|
|
Zhang B, Xu W, Wu X R. 2022. Weight function methods and stress intensity factors for two unsymmetric through and corner cracks at a circular hole. Engineering Fracture Mechanics, 264: 108361. doi: 10.1016/j.engfracmech.2022.108361
|
|
|
Zhang J, Leung C K, Gao Y. 2011. Simulation of crack propagation of fiber reinforced cementitious composite under direct tension. Engineering Fracture Mechanics, 78: 2439-2454. doi: 10.1016/j.engfracmech.2011.06.003
|
|
|
Zhang J, Li V C. 2004. Simulation of crack propagation in fiber-reinforced concrete by fracture mechanics. Cement and Concrete Research, 34: 333-339. doi: 10.1016/j.cemconres.2003.08.015
|
|
|
Zhang Y, Ren X, Zhou J Z, et al. 2009. Investigation of the stress intensity factor changing on the hole crack subject to laser shock processing. Materials & Design, 30: 2769-2773.
|
|
|
Zhao W, Wu X R, Yan M G. 1989a. Weight function method for three dimensional crack problems—I. Basic formulation and application to an embedded elliptical crack in finite plates. Engineering Fracture Mechanics, 34: 593-607. doi: 10.1016/0013-7944(89)90122-7
|
|
|
Zhao W, Wu X R. 1990a. Stress intensity factor evaluation by weight function for surface crack in edge notch. Theoretical and Applied Fracture Mechanics, 13: 225-238. doi: 10.1016/0167-8442(90)90090-M
|
|
|
Zhao W, Wu X R. 1990b. Stress intensity factors for corner cracks at a semi-circular notch under stress gradients. Fatigue & Fracture of Engineering Materials & Structures, 13: 347-360. doi: 10.1111/j.1460-2695.1990.tb00606.x
|
|
|
Zhao W, Wu X R, Yan M G. 1991. Stress intensity factors for corner cracks at a hole under remote tension. Acta Mechanica Sinica, 7: 76-81. doi: 10.1007/BF02486599
|
|
|
Zhao W, Wu X R, Yan M G. 1989b. Weight function method for three dimensional crack problems—II. Application to surface cracks at a hole in finite thickness plates under stress gradients. Engineering Fracture Mechanics, 34: 609-624. doi: 10.1016/0013-7944(89)90123-9
|
|
|
Zhao W, Sutton M A, Shivakumar K N, Newman Jr J C. 1994. Stress intensity factors for surface and corner cracks emanating from a wedge-loaded hole// FAA/NASA International Symposium on Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance. Hampton, VA, USA, May 1994. NASA Conference Publication 3274.
|
|
|
Zhao W, Newman Jr J C, Sutton M A. 1997a. A three-dimensional weight function method—evaluation and applications// Fatigue and Fracture Mechanics: 27th Volume: ASTM STP 1296.
|
|
|
Zhao W, Newman Jr J C, Sutton M A, Wu X R, Shivakumar K N. 1997b. Stress intensity factors for corner cracks at a hole by a 3-D weight function method with stresses from the finite element method. Fatigue & Fracture of Engineering Materials & Structures, 20: 1255-1267.
|
|
|
Zhao W, Newman Jr J C, Sutton M A, Shivakumar K N, Wu X R. 1998. Stress intensity factors for surface cracks at a hole by a three-dimensional weight function method with stresses from the finite element method. Fatigue & Fracture of Engineering Materials & Structures, 21: 229-239.
|
|
|
Zhao X C, Wu X R, Newman J C, Tong D H. 2016. Stress intensity factors for surface cracks in single‐edge notch bend specimen by a three-dimensional weight function method. Fatigue & Fracture of Engineering Materials & Structures, 39: 1407-1418.
|
|
|
Zhao X C, Wu X R, Newman Jr J C, Tong D H. 2017. Stress intensity factors for corner cracks in single-edge notch bend specimen by a three-dimensional weight function method. Fatigue & Fracture of Engineering Materials & Structures, 40: 277-287.
|
|
|
Zheng X J, Glinka G, Dubey R N. 1996. Stress intensity factors and weight functions for a corner crack in a finite thickness plate. Engineering Fracture Mechanics, 54: 49-61. doi: 10.1016/0013-7944(95)00171-9
|
|
|
Zhou Y C, Long S G, Liu Y W. 2003. Thermal failure mechanism and failure threshold of SiC particle reinforced metal matrix composites induced by laser beam. Mechanics of Materials, 35: 1003-1020. doi: 10.1016/S0167-6636(02)00322-8
|
|
|
Zhuang W. 2000. Prediction of crack growth from bolt holes in a disc. International Journal of Fatigue, 22: 241-250. doi: 10.1016/S0142-1123(99)00122-X
|
Figures(72)
DownLoad:
