Abstract:As a kind of vibration control unit, dynamic vibration absorber is widely used in various engineering situations, but the traditional linear vibration absorber can only achieve narrow band vibration control. On the basis of the linear vibration absorber, this paper introduces symmetrical horizontal springs to build a combined stiffness nonlinear vibration absorber with linear stiffness and nonlinear stiffness to improve the vibration absorption performance of the absorber. Considering the possible installation modes in actual projects, the combined stiffness nonlinear vibration absorber models of horizontal spring with grounding and without grounding are established respectively. The dynamic response is solved analytically by the harmonic balance method combined with the arc length continuation method, and the results are mutually verified with the numerical results, which proves the accuracy of the solution results. Then, the vibration absorption performance between two kinds of combined stiffness nonlinear vibration absorbers, the linear vibration absorber, and the nonlinear energy sink is analyzed and compared. It is found that the combined stiffness nonlinear vibration absorbers with horizontal spring grounding installation type not only retain the advantages of the linear vibration absorber, but also improve the shortcomings of its narrow vibration absorption frequency band. In addition, the combined stiffness nonlinear vibration absorber of horizontal springs grounding installation type has better vibration absorption performance in a wider frequency band near the main resonance frequency than the nonlinear energy sink. On this basis, the effects of horizontal spring parameters and absorber damping on the amplitude-frequency response and stability of the main structure are discussed. Finally, the complex dynamic behavior in the unstable region of the amplitude-frequency response curve of the main structure is observed and analyzed. The research results show that the appropriate design parameters can make the vibration peak value of the main structure low, and the unstable movement area of the frequency response curve is also small.